Connecting K-Mobile X to Trimble R10 GNSS Receiver
This document details the steps necessary to connect a Trimble R10 GNSS receiver to an Android device and use it with K-Mobile X. [Connecting_R10_to_K-Mobile_X.pdf][1] [1]: https://hf-files-oregon.s3.amazonaws.com/hdpkorecgroup_kb_attachments/2020/01-03/a46b0ef5-735f-4bdd-af28-d04f09371ee0/Connecting_R10_to_K-Mob…
📃PDF - Setup of VRS in Trimble Access Using an R10 as Modem
A guide showing how to create a VRS survey style and GNSS contact in Trimble Access 2018. [28.1-Trimble-Access-VRS-Guide-R10.pdf][1] [1]: https://hf-files-oregon.s3.amazonaws.com/hdpkorecgroup_kb_attachments/2022/02-24/06cfc775-f561-4254-a049-b38ad63c3b3e/28.1-Trimble-Access-VRS-Guide-R10.pdf
Configure the NMEA Output on a R10 Receiver
A guide showing how to configure the NMEA output for a R10 using the Web UI and Trimble Access. [31.1-R10-NMEA-Output.pdf][1] [1]: https://hf-files-oregon.s3.amazonaws.com/hdpkorecgroup_kb_attachments/2018/10-31/5dc9c7ae-5487-4c18-8486-f4fb1568bf7a/31.1-R10-NMEA-Output.pdf
How to Update Receiver Firmware & Configuration for New AES Encrypted RTX Beam
A video showing how to upgrade the firmware and change the RTX satellite frequency on an R10 receiver, to enable the use of the new AES encrypted RTX correction stream. This update is required for the continued use of the xFill service. The same procedure applies to the R10, R10-2, R9s and R2 GNSS receiver. [7.1-Conf…
📽Video - How to Create a VRS Connection on a TSC3 Controller Using an R10 with a Multinetwork SIM Card
A video showing how to configure the internet connection with a multinetwork SIM in the R10 receiver, create a GNSS contact and create a VRS survey style in Trimble Access. :
