Videos - Scaling Data to Scale Factor 1 from OSTN15 co-ordinates in Trimble Access
Here are 3 video guides on how to use Trimble Access to Scale GNSS Data to Scale Factor 1 Video 1 - Change the Scale Factor to 1 for survey data in OSTN15 - Single Point Calibration [Video 1 download link here][1] Video 2- Change the Scale Factor to 1 for survey data in OSTN15 - Inspecting the ground scale factor &…
📃PDF - Site calibration with Trimble Access
Here is a PDF guide on how to carry out a site calibration using Trimble Access 2022 with a CSV file of local ground co-ordinates _[51.1 PDF - Site calibration in Trimble Access][1]_ [1]: https://hf-files-oregon.s3.amazonaws.com/hdpkorecgroup_kb_attachments/2022/06-28/96879940-e19d-4e64-9184-2aadd575885d/51.1_Sit…
Postprocessing GNSS data in K-Console and GPS Pathfinder Office
This guide takes you through the steps to setup automatic postprocessing of GNSS data in K-Console. A licensed install of GPS Pathfinder Office is required to perform the first two stages of postprocessing. The first is to apply differential corrections to the data and the second to export the data from Pathfinder Off…
UK - Trimble VRSNow Network Base Station Coordinates Pre OSTN15 Change (August 2016)
**Description**: The ETRS89 coordinates in the OS Net GNSS Receiver Network were updated to coincide with the introduction of OSTN15. This file provides coordinates for GNSS Receivers in the combined OS and Trimble network prior to the introduction of the OSTN15 changes in August 2016. The coordinates are provided in…
